Welded grid fence

Welded grid fence or welded panel fence

Welded grid fence is one of the most common types of fencing for objects of any purpose – such a fence can surround the territory of a kindergarten, shopping center, car park or even a large enterprise. Given the wide range of fence panels and the variety of their parameters – by wire thickness, by color gamut, by size – this fence is a good choice for any buyer. In addition, welded grid fence, and as a strong and reliable means of fencing the territory, can become the basis for more serious perimeter protection – video surveillance systems, alarms, barbed wire or security barriers of various types.

A welded grid fence is made on the basis of standard panels of various sizes, welded from steel wire with a diameter of 3 to 6 mm and rectangular posts of the required height. The standard length of the fence panel is 2.5 m, the height of the panel can be different, in addition, you can connect several panels by placing one above the other and get a fence of almost any desired height. The panels are attached to poles with special clamps that ensure reliable connection of panels and fence posts, as well as preventing their quick dismantling to destroy the fence – the clamps are anti-vandal. Pillars and welded fence panels can have two types of corrosion protection performance – either only hot zinc coating after welding, or zinc coating and polymer powder coating, which provides additional corrosion protection and gives the fence the desired color.

Fence posts can be installed in two ways – with a hole in the concrete base or with a flange connection to the foundation. The most reliable way to install such a fence is a continuous strip foundation around the entire perimeter, which will provide a reliable base for the fence from welded panels and additional protection against undermining. In the absence of a solid foundation, additional welded panels placed under the main fence can be used to protect from undermining. In this case, it is impossible to partially deepen the main welded panel of the fence into the ground, it is necessary to use two separate panels, and without a rigid connection to each other.

A fence made of welded panels can be the basis for a perimeter engineering protection system, and it may include increased columns for installing surveillance cameras, holders for barbed wire and security barriers, additional panels to protect from digging, a vibration-sensitive element of the alarm system can be placed on the fence, and the fence design itself can be significantly strengthened with < a href="/en/catalog/obstacles/razor-mesh">Piranha razor mesh. In any case, our specialists will help you deal with the design of the fence and perform all the necessary work on its installation.