Kayman flat barrier fence

Kayman flat security barrier fence

Flat barrier fence

Fence height 2.4 m Fence section length 2.5 m Barbed wire 3.8 mm

Flat barrier fence

Kayman flat barrier fence is one of the types of fences that use prefabricated Kayman razor wire fences. The fence from the Egoza-Kayman flat barriers is three to four rows of a flat barrier mounted on poles and a tension wire. This design of the fence provides a high level of protection of the territory and an acceptable cost of the fence as a whole. To increase the protective properties, the upper row of the flat barrier for can be installed not vertically, but with a slope in or out of the protected area, depending on the purpose of the object.

For the manufacture of the fence, a flat security barrier is used made of Egoza-Kayman barbed wire with a diameter of 3.8 mm. We mass-produce two types of Kayman flat barriers – with a coil diameter of 600 and 750 mm, but it is preferable to use a flat barrier 600 mm wide for erecting fences due to the smaller distance between the turns of the barrier. Egoza-Kayman barbed wire, used in the construction of a flat barrier, has a high-carbon core with a diameter of 2.8 mm made of galvanized spring wire and barbed razor nipples made of galvanized steel with a thickness of 0.5 mm. The zinc coating of the core is at least 100 g/m2, and the barbed tape is within 140-290 g/m2, which reliably protects the razor wire from corrosion.

Installation of a fence from a Kayman flat barrier is carried out using new columns, or left over from the old fence – this will significantly reduce the cost of erecting a new fence from a flat barrier. Between the posts in several rows, a tension wire is installed, to which a Kayman security barrier is attached using Super clipss. Separate sections of the Kayman flat barrier are also fastened together using Super clips. In addition, a flat barrier is attached to the posts using clipss or a knitting wire, depending on the material and design of the fence posts.

The installation of a fence from a flat security barrier is associated with many different factors, from preparatory work to working with such a dangerous product as Kayman barbed wire, so it is better to entrust the work of installing fences from a flat barrier to professionals. Our installers are highly qualified and have been working with the Kayman barbed wire for many years, which is why they are able to perform installation of fences from any type of barbed wire in a short time.

Specifications

Fence height, mm 2400
Fence section length, mm 2500
Barbed wire diameter, mm 3.8
Diameter of a turn of a flat barrier, mm 600

May need

"Egoza" razor tape

Rape width 19 mm Tape thickness0.5 mm Zinc coating up to 290 g/m2

more details

"Super" clip

Wire diameter up to 5.0 mm Clip length 45 mm Metal thickness 1.5 mm

more details

Tension wire

Tension wire

Wire diameter up to 3.0 m Zinc coating up to 100 g/m2 Tear resistance 1600 N/mm2

more details

U-type holders for welding

Holder for welding

barrier diameter up to 1350 mm Mounting type welding Surface coating primer

more details